Deep Blue BlueFox Basic Instrucciones de operaciones descargar pdf (Pagina 16)

Procedure

y Connect the 12 V cable to the alarm box and screw tight.

y Fix the 12 V cable.

Danger! Electric shock risk!

Do not use extension cables between the plug-in mains adapter and the

mains socket.

y Insert the plug-in mains adapter into a mains socket (with earth terminal) located

away from the wet area. Use a residual current circuit breaker. (See above, Re-

quirements for the plug-in mains adapter, P. 15). The last selected operating mode

is activated (see Operating principle "passive mode", P. 10, Operating principle "Ac-

tive mode", P. 8, System settings, P. 22.

y If the cable is too short, have an additional mains socket (with residual current

circuit breaker and earth terminal) tted outside the wet area by an approved

electrician.

4.2 Fitting the pool sensor

The pool sensor must be tted to the pool wall 50 cm /1.6 ft beneath the water

surface (PRO 2 pool sensors). It is not necessary to reduce the water depth in order

to t the sensor. The supplied adhesive can be used underwater.

Swimming pool

Water surface

50 cm

1.6 ft

Fig. 4 Positioning the pool sensor

y Do not t the pool sensor close to inlet jets, countercurrent systems or air jet

nozzles.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Sin comentarios

Deep Blue BlueFox Basic Instrucciones de operaciones Pagina 16